Interior cabinet for storage of medical equipment, lock-out kit, and other rescue-related bags.
The thermal imager and portable radios will be mounted on top of this cabinet.
|
|
| |
The larger cabinet will hold rappelling harnesses and helmets, dry suits and helmets for water rescue, AED, trauma bag, oxygen, blankets, and other equipment that should be kept warm.
The cabinet also contains both 12-volt and 120-volt receptacles for ALS equipment.
|
|
| |
The officer's side pump panel allows access for the stokes basket, two backboards, and Little Giant Ladder.
The hose trough will hold the Pro-Pak foam unit pre-connected to the bottom discharge.
|
|
| |
The officer's side compartment behind the pump panel holds two 200-ft. hydraulic reels and one 200-ft. 220-volt electric reel.
The bottom slide-out tray will carry a pre-connected AMKUS 32" spreader and "O" cutter.
Other shelves will hold chains, a come-a-long, a porta-power, clevises, straps, flares, and other equipment required to meet Harford County Rescue Specifications.
|
|
| |
Front compartments over the wheelwells on each side will hold firefighting tools on swing-out toolboards. The toolboards will also secure numerous pieces of wood cribbing and wedges as well as tool boxes on the shelf above.
The rearward compartment over the wheels will possibly carry rope rescue equipment on one side and salvage equipment on the other.
Wheelwell compartments will carry three spare SCBA cylinders and four step chocks. This area also contains a 2" receiver for the portable winch or tie-off point, warning lights, back-up lights, turn signal, and 110-volt receptacle.
|
|
| |
The officer's side rear compartment contains five slide-out toolboards for tripod lights, Hi-Lift Jacks, shovels, brooms, mauls, Paratech Struts, and AMKUS Rams.
Pickets are stored against the side wall and bottle jacks on the floor of the compartment.
The yellow handle controls the flow of the stay-dry absorbent which discharges under the compartment behind the mudflap.
|
|
| |
The rear compartment allows access to the low-pressure air reel with 140 ft. of hose. Next to this is the box where the high-pressure air bags and plywood will be stored.
Directly under the air bags, the Paratech controls and working air bottle will be secured to one side of the slide out toolboard.
The opposite side of the toolboard will hold the CO2, dry chemical, pressurized water, and class D fire extinguishers. Above the extinguishers are two poly bins for air tools.
The officer's side contains storage for the 2-section 35-ft. extension ladder and 20-ft. roof ladder as well as the 14-ft. attic ladder and 12-ft. and 14-ft. pike poles.
Under the ladders are the air reel rewind button, 110-volt receptacle, 220-volt receptacle, and rear tow hook/attachment point.
|
|
| |
The driver's side contains storage for the 2-section 28-ft. extension ladder, 16-ft. roof ladder, 10-ft. attic ladder, and 8-ft. and 10-ft. pike poles.
Under the ladders are controls for the Atlas Copco Air Compressor, 110-volt receptacle, 12-volt receptacle for the portable winch, and switch to control the rear 1000-watt quartz light.
|
|
| |
The top side contains coffin compartments on each side as well as storage for the stay-dry absorbent and Atlas Copco Air Compressor.
The hard hosebed cover allows access to these compartment and covers the two - 1-3/4" hoselines, hardsleeves and 5" and 3" supply line.
The design of this area was greatly influenced by our neighbors at Bel Air.
|
|
| |
The driver's side rear compartment will carry all of our gas-powered equipment, saws, cutting tools, and fan.
|
|
| |
Each side of the body holds three 1000-watt quartz lights. Combined with the 1000-watt quartz light on the side of the cab, 4000 watts of lighting are available on each side.
|
|
| |
The driver's side compartment ahead of the wheels will carry two 200-ft. hydraulic reels and one 200-ft. 220-volt electric reel.
This area also contains the breaker panel, driver's SCBA, small refrigerator, and poly bins for storage.
Beneath these items are the second set of pre-connected AMKUS 32" spreaders and "O" cutters on a slide out tray.
Each side also contains a 12-volt power lead for the portable winch.
Beneath each of these compartments is a cribbing compartment with a drop-down door.
Ahead of this compartment is the pump panel where the driver can control the fire pump and controls for the 9000-watt light tower.
|
|
| |
The front bumper contains the 100-ft. 220-volt electrical cord, 100-ft. hydraulic reel, low-pressure air port, 12,000# electric winch, AMKUS pre-connected combination tool, storage area for chain and winch remote, and dunnage area for 100 ft. of 1-3/4" hose.
|
|
| |
|
| By Captain Dave Pullen |
| October 16, 2009 |
Members of the Rescue 751 Committee went to Meyersdale, PA, last week to take out some equipment for mounting at 4-Guys Fire Trucks. The day was spent going over the compartments one at a time and discussing tool mounting.
With the final delivery date approaching pictures of the unit were provided from 4-Guys. |
|